Disabling Film Break Sensors on the 1400-V | Step-by-Step Guide

Instructions: How to Turn Off Film Break Sensors on the 1400-V

Instructional Video

To disable the Film Break sensors on the 1400-V, follow these steps using the RDS controller interface:

1. Enter the Main Menu
   Press the Menu button on the RDS controller to access the main navigation screen.

    

2. Go to Operator Setup
   Use the down arrow to scroll to Operator Setup, then press the Enter or Right Arrow button.

    

3. Navigate to Automation Setup
   Within Operator Setup, scroll down to find Automation Setup, then press Enter.

    

4. Locate the 'Film Break' Option
   In Automation Setup, scroll down to the setting labeled "Film Break."

    

5. Toggle Film Break to OFF
   With "Film Break" highlighted, press the Right Arrow to change the value from ON to OFF.

    

6. Exit the Menu
   Press ESC or Back as needed to return to the main screen. Your setting will be saved.