Views:

Prerequisites

  • Access to the RDS Export Controller interface.

  • Technician Access Password (1234).

Step-by-Step Procedure

1. Access the Technician Setup Menu

  • Press the Menu button on the controller.

  • Cycle or scroll through the menu options until you locate Technician Setup.

  • Press Enter to select it.

2. Security Authentication

  • When prompted by the system, input the following security password:

    Password: 1234

  • Press Enter to confirm the password.

3. Select the Software Model

  • Navigate to the model selection interface.

  • Follow the sequence to locate and confirm the desired configuration:

    Sequence: Choose Model A200-EH

  • Press Enter to save the changes and update the controller software configuration.

Troubleshooting & Support

  • Incorrect Password: If the password 1234 is rejected, verify that you are in the correct Technician Setup menu and try re-entering the digits carefully.

  • Model Not Listed: If the A200-EH model is not visible in the sequence, ensure the controller hardware version supports this software build.

Keywords: RDS Export Controller, A200-EH, Tanco product support, Technician Setup, Change software model, Select software sequence, Controller configuration, Technician menu access, Update controller software, RDS controller password, Technician password 1234, Authorized personnel setup